Category: | DIPOXY-2K-4000GeodeART |




DIPOXY-2K-4000 GeodeART is a crystal clear, medium-viscosity epoxy resin and is available exclusively from us in
"Premium Quality" for creating geodes, images and jewelry made and sold!
In general, DIPOXY epoxy resins are ideal for almost any application! e.g. in jewelry,
the table production, so-called "River Table", for floors, pond, aquarium and terrarium construction, as well
for boat, ship and aircraft construction. Molded parts can also be poured into silicone molds, for example
or carbon, aramid and glass fiber connections are also possible. Also ideal for model making suitable!
The best results are achieved with our effect paints and pigments developed for epoxy resins!

The solvent-free DIPOXY-2K-4000 Geode Art is used in a mixing ratio of 2: 1 (e.g. 100g A and 50g B)
Simply select the desired amount of epoxy resin and add it to the shopping cart. Then select the color pigments and also place them in the shopping cart.
(We also have many other effect pigments in the shop)
The best results are achieved with our effect pearl color pigments developed for epoxy resins!
! Danger !
As soon as both components are mixed, a chemical reaction occurs, at which heat
is released. Depending on how high the vessel is, the heat may not be rapid
enough to escape through the surface. The following rule applies:
"Better wide and flat than tall and narrow!" For this reason we recommend one MAXIMUM Casting height of 10mm at once!
If you want to pour higher than 10mm, you should work in several shifts, or use the Dipoxy-2K-700PER or the 700Expert!
All information is provided without warranty!
The rough rule for consumption is:
1kg = 1mm height per 1m² (1m x 1m)
Consumption quantities DIPOXY-2K-4000 GeodeART for floor coating (private and commercial):
Primer (mostly black, white or transparent)
0.4 - 0.6 kg per m² (0.4 - 0.6 mm per m²)
Color effect layer (middle layer)
1 - 3 kg per m² (1 - 3 mm per m²)
Sealing (final layer is not absolutely necessary)
1 - 2 kg per m² (1 - 2 mm per m²)
Consumption amounts of effect pearl pigment for floor coating (private and commercial):
Depending on how thin you want to apply, you need between 5g and 25g of the epoxy mass (by weight) of pigments per kg.
Consumption quantities DIPOXY-2K-4000GeodeART for casting projects (river table):
Primer (mostly transparent)
0.2 - 0.4 kg per m² (0.2 - 0.4 mm per m²)
Color effect layer (middle layer)
10-11 kg per m² (approx. 1 cm per m²)
Sealing (final layer is not absolutely necessary)
Depending on how transparent everything should be, you need between 0.5g and 15g of the epoxy mass (by weight) of pigments per kg.
Processing time / drip time:
at 10 ° C approx. 40-60min.at 20 ° C approx. 20-40min.
at 30 ° C approx. 10-25min.
over 30 ° C is possible, but without a time limit!
Storage:
1 year / ideally at 10-25 ° C, dry and protected from direct sunlight!
- Hazard warnings:
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H317 can cause allergic reactions to your skin.
- H411 ??Toxic to aquatic life with long lasting effects.
- Safety instructions:
- P261 Avoid breathing dust / smoke / gas / mist / vapor / aerosol.
- Avoid the release of P273 into the environment.
- P280 Wear protective gloves / eye protection / face protection.
- P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
- Remove any existing contact lenses if possible. Continue rinsing.
- P321 Specific treatment (see on this label).
- P501 Dispose of contents / container in accordance with local / regional / national /
- international regulations.
- EUH205 Contains epoxy constituents. Can cause allergic reactions.
- · after skin contact: Wash off immediately with soap and water and rinse well.
· After eye contact: Eyes several minutes with opened eyelids under flowing
Rinse with water. Consult a doctor if symptoms persist.
· After ingestion: Do not induce vomiting, call for medical help immediately.
Rinse your mouth and drink plenty of water. -
Business hours:
Monday - Friday:
8:00 a.m. - 12:00 p.m. and 1:00 p.m. - 6:00 p.m.
Additional information by telephone:
(limited)
Saturday & Sunday: 10:00 a.m. - 2:00 p.m.
VASA-Fit GmbH / Kinzigheimer Weg 115/63450 Hanau
Management: Sascha Katzenstein
HRB 94572
VAT number: DE265265705
We are legally obliged to provide the following information:
Online dispute resolution in accordance with Art. 14 para. 1 ODR-VO: The European Commission provides a platform for online dispute resolution (OS), which you can find under
https://ec.europa.eu/consumers/odr/
