52,8 KG Epoxy Resin Crystal Clear Casting 2 K Resin+Harder 0,1 -5cm max 10cm

Item number: 3516

EAN: 0737356358928

Category: DIPOXY-2K-700PRO


Now only 546,32 €
10,35 € per 1 kg

including 16% VAT. , no shipping costs (Paketversand)

Old price: 575,08 €
Discount: 5%
Available now!


- DIPOXY-Crystal-Clear-Scratch-Resistant-Epoxy-Resin - 2K - DIPOXY-Crystal-Clear-Scratch-Resistant-Epoxy-Resin - 2K -

 


Up to 10 centimeters pour all at once!

- DIPOXY-2K-700PER -

 


DIPOXY-2K-700
PER was developed especially for thick film applications 10 centimeters developed. You can use it, for example

"River Table" can be easily produced in one pour! The curing time is significantly longer than with

our DIPOXY-2K-700 because we had to reduce the chemothermal reaction very much in order to do this

Layer thickness! How high you can actually pour depends on that

Ambient temperature from and how wide and long is poured! Eg 4.5cm high, 4cm - 18cm wide and

200cm long at a temperature of 14 ° C has become very nice as an experiment! (See image)

 

 

DIPOXY-2K-700PER is a crystal clear, low viscous epoxy resin and we only use it in

"Premium quality" manufactured and distributed! DIPOXY is ideal for almost

any application! For example: in jewelry, table making, so-called "river table" for

Floors, pond, aquarium and terrarium construction, as well as for boat, ship and aircraft construction. Also

Molded parts can, for example, be cast in silicone molds or carbon, aramid and

Fiber optic connections are possible. Also ideal for model making! The best

Results are achieved with our Effect Pearl color pigments developed for epoxy resins!


 

Simply select the desired amount of epoxy resin and add it to the shopping cart. Then select the color pigments and also add them to the shopping cart.


(We also have many other effect pigments in the shop)


The best results are achieved with our Effect Pearl color pigments developed for epoxy resins!

 

The solvent-free DIPOXY-2K-700PER is in the mixing ratio of 100: 32 (e.g. 100g A and 32g B)

Mass units (by weight) mixed and can therefore be easily processed. Ideally, the

Components A and B mixed at a temperature of 10 ° C - 25 ° C. It's basically self-venting,

for best results, you should still take care with a maximum of 250 - 350U / min.

for about. Stir for 4 - 5 minutes until both components are well mixed and at the low number of revolutions not so much air is worked into the epoxy resin mixture!

 

 

! Attention !

As soon as both components are mixed, a chemical reaction occurs, in which heat slowly

is released. Depending on how high the finished mixture is in a container, the heat cannot go quickly

enough to be dissipated through the surface. If you do not process it immediately, the rule always applies:

"Better to stand wide and flat than to stand tall and narrow!"

Depending on what you want to do, the following information from our experiments will help you. You can of course also use more material!

All information is provided without warranty!

The rough rule for consumption is:

1kg = 1mm height per 1m² (1m x 1m)


Consumption quantities DIPOXY-2K-700PER for floor coating (private and commercial):

Primer (usually black, white or transparent)

0.4 - 0.6 kg per m² (0.4 - 0.6 mm per m²)

Color effect layer (middle layer)

1 - 3 kg per m² (1 - 3 mm per m²)

Sealing (final layer is not absolutely necessary)

1 - 2 kg per m² (1 - 2 mm per m²)

Amounts of Effect Pearl Pigment for floor coating (private and commercial):

Depending on how thin to apply, you need between 5g and 25g of the epoxy mass (by weight) of pigments per kg.

 

Consumption quantities DIPOXY-2K-700PER for casting projects (river table):

Primer (mostly transparent)

0.2 - 0.4 kg per m² (0.2 - 0.4 mm per m²)

 

Color effect layer (middle layer)

10 -11 kg per m² (approx. 1 cm per m²)


Sealing (final layer is not absolutely necessary)

1 - 2 kg per m² (1 - 2 mm per m²)


Amounts of Effect Pearl Pigment used for casting projects (river table):

Depending on how transparent everything should be, you need between 0.5g and 15g of the epoxy mass (by weight) of pigments per kg.

 

Processing time / drip time:

at 10 ° C approx. 360-600min.
at 20 ° C approx. 240-480min.
at 30 ° C approx. 120-360min.
over 30 ° C is possible, but without time information!


Ultimate strength:
at 10 ° C for at least 7 days to walk on and 4 weeks for heavy loads.
at 20 ° C for at least 5 days to walk on and 3 weeks for heavy loads.
at 30 ° C for at least 3-4 days to walk on and 1-2 weeks for heavy loads.

Storage:
1 year / optimal at 10-25 ° C, dry and protected from direct sunlight!

If, contrary to expectations, you should have a problem or just want to find out more, just give us a call!

Our competent service staff will be happy to take care of your concerns and advise you professionally!


Where can you find an epoxy resin with this price / performance ratio?

Only with us!


Business hours:

Monday - Friday:

8:00 a.m. - 12:00 p.m. and 1:00 p.m. - 6:00 p.m.

Additional information by phone:

(limited)

Saturday & Sunday: 10 a.m. - 2 p.m.


VASA-Fit GmbH / Kinzigheimer Weg 115/63450 Hanau

Management: Sascha Katzenstein

HRB 94572

VAT ID: DE265265705

We are legally obliged to provide the following information:

Online dispute resolution in accordance with Art. 14 para. 1 ODR-VO: The European Commission provides a platform for online dispute resolution (OS), which you can access at

https://ec.europa.eu/consumers/odr/



Shipping weight: 60,00 Kg
Product weight: 52,80 Kg
Contents: 52,80 kg

Please login first to add a tag.