| 
- DIPOXY-crystal-clear-scratch-resistant epoxy resin - 2K - DIPOXY-Crystal-Clear-Scratch-Resistant-Epoxy-Resin - 2K -
 - DIPOXY-2K-700 -
DIPOXY-2K-700 is a crystal clear, low viscosity epoxy resin (2 components) which is only available in Germany
"Premium quality" is manufactured and distributed!
DIPOXY-2K-700 epoxy resin is ideal for almost
any application! For example: in jewelry, table making, so-called "river table" for
Floors, pond, aquarium and terrarium construction, as well as for boat, ship and aircraft construction. Also
Molded parts can, for example, be cast in silicone molds or carbon, aramid and
Fiber optic connections are possible. Also ideal for model making!
Simply select the desired amount of epoxy resin and add it to the shopping cart. Then select the color pigments and also add them to the shopping cart.
(We also have many other effect pigments in the shop)
The best results are achieved with our Effect Pearl color pigments developed for epoxy resins!
The solvent-free DIPOXY-2K-700 is used in a mixing ratio of 2: 1 (e.g. 100g A and 50g B)
Mass units (by weight) mixed and can therefore be easily processed. Ideally, the
Components A and B mixed at a temperature of 10 ° C - 20 ° C. DIOPXY-2K-700 is basic
self-venting, for best results, you should still take care with approx. 250-350rpm.
for about. Stir for 4-5 minutes until both components are well mixed and not so much air is incorporated into the epoxy resin mixture at the low speed!
! Caution, risk of burns!
As soon as both components are mixed, a chemical reaction occurs, in which heat is released
becomes. Depending on how high the mixture is in a jar or bucket, the heat may not be quick enough
be dissipated through the surface. So the rule always applies: "Better wide and flat than high
and narrow! "If, for example, a mixture with 300ml in a beaker approx. Stands 15cm high
it probably (depending on the outside temperature) after 15-25min. get so hot that you burn yourself
can and then it hardens immediately! But if you put the same mixture in a bucket and put it
is only 1cm high, it doesn't get hot and you can probably process it well in 60min!
Depending on what you want to do, the following information from our experiments will help you. You can of course also use more material!
All information is provided without warranty!
The rough rule for consumption is:
1kg = 1mm height per 1m² (1m x 1m)
Amounts of DIPOXY-2K-700 used for floor coating (private and commercial):
Primer (usually black, white or transparent)
0.4 - 0.6 kg per m² (0.4 - 0.6 mm per m²)
Color effect layer (middle layer)
1 - 3 kg per m² (1 - 3 mm per m²)
Sealing (final layer is not absolutely necessary)
1 - 2 kg per m² (1 - 2 mm per m²)
Amounts of Effect Pearl Pigment for floor coating (private and commercial):
Depending on how thin to apply, you need between 5g and 25g of the epoxy mass (by weight) of pigments.
Consumption quantities of DIPOXY-2K-700 for casting projects (river table):
Primer (mostly transparent)
0.2 - 0.4 kg per m² (0.2 - 0.4 mm per m²)
Color effect layer -1- (middle layer)
10 -11 kg per m² (approx. 1 cm per m²)
approx. Wait 6-8 hours and then
Color effect layer -2- (middle layer)
10 -11 kg per m² (approx. 1 cm per m²)
approx. Wait 6-8 hours and then
3, 4, 5, 6, etc. ... depending on how thick the table top is!
Sealing (final layer is not absolutely necessary)
1 - 2 kg per m² (1 - 2 mm per m²)
Amounts of Effect Pearl Pigment used for casting projects (river table):
Depending on how transparent everything should be, you need between 0.5g and 15g of the epoxy mass (by weight) of pigments.
Processing time / drip time:
at 10 ° C approx. 40-60min.
at 20 ° C approx. 20-40min.
at 30 ° C approx. 10-25min.
over 30 ° C is possible, but without time information!
Ultimate strength:
at 10 ° C for at least 72 hours to walk on and 10-14 days for heavy loads.
at 20 ° C for at least 24 hours to walk on and 6-10 days for heavy loads.
at 30 ° C for at least 12 hours to walk on and 2-5 days for heavy loads.
Storage:
Optimal at 10-15 ° C, dry and protected from direct sunlight!
 
If, contrary to expectations, you should have a problem or just want to find out more, just give us a call!
Our competent service staff will be happy to take care of your concerns and advise you professionally!
Where can you find an epoxy resin with this price / performance ratio? Only with us!
Business hours: Monday - Friday:
8:00 a.m. - 12:00 p.m. and 1:00 p.m. - 6:00 p.m.
Additional information by phone: (limited) Saturday & Sunday: 10 a.m. - 2 p.m.
VASA-Fit GmbH / Kinzigheimer Weg 115/63450 Hanau Management: Sascha Katzenstein
HRB 94572 VAT ID: DE265265705 We are legally obliged to provide the following information: Online dispute resolution in accordance with Art. 14 para. 1 ODR-VO: The European Commission provides a platform for online dispute resolution (OS), which you can access at
https://ec.europa.eu/consumers/odr/
|
German
French
Italian
Spanish